Microstop Clean - a universal tool for cleaning dry heat sterilizers and manicure tools.
The tool will easily cope with the cleaning of the sterilizer from plaque formed by the action of combustion products, while carefully cleaning the tool from plaque, which may appear after treatment with chemicals or as a result of exposure to high temperatures.
Exceptions are products made of aluminum, non-ferrous metals and galvanized parts - they should not be treated with Microstop Clean.
How to use Microstop Clean for cleaning dry heat:
1. Microstop Clean does not need to be diluted, it is completely ready for use.
2. Apply the product to the surface to be cleaned with an abrasive-free sponge or sponge: the inner surface of the lid, the tool tray, the holders for the kraft bags and the sterilization chamber.
3. The surface temperature should not exceed 60 ° C.
4. Leave on the surface for 30 minutes.
5. Clean thoroughly.
6. Before the procedure, make sure that the dry heat has cooled.
7. Avoid getting the substance on the heating element, thermal fuse and temperature sensor dry heat.
How to use Microstop Clean to clean the tool:
1. Prepare a solution of Microstop Clean and water in a ratio of 1: 2 (concentrate: water).
2. Microstop Clean should be added to water, not the other way around.
3. Fold the tools into the solution for 5-15 minutes.
4. After exposure, rinse under running water.
5. Microstop Clean can be used in the ultrasonic bath.
The tool will easily cope with the cleaning of the sterilizer from plaque formed by the action of combustion products, while carefully cleaning the tool from plaque, which may appear after treatment with chemicals or as a result of exposure to high temperatures.
Exceptions are products made of aluminum, non-ferrous metals and galvanized parts - they should not be treated with Microstop Clean.
How to use Microstop Clean for cleaning dry heat:
1. Microstop Clean does not need to be diluted, it is completely ready for use.
2. Apply the product to the surface to be cleaned with an abrasive-free sponge or sponge: the inner surface of the lid, the tool tray, the holders for the kraft bags and the sterilization chamber.
3. The surface temperature should not exceed 60 ° C.
4. Leave on the surface for 30 minutes.
5. Clean thoroughly.
6. Before the procedure, make sure that the dry heat has cooled.
7. Avoid getting the substance on the heating element, thermal fuse and temperature sensor dry heat.
How to use Microstop Clean to clean the tool:
1. Prepare a solution of Microstop Clean and water in a ratio of 1: 2 (concentrate: water).
2. Microstop Clean should be added to water, not the other way around.
3. Fold the tools into the solution for 5-15 minutes.
4. After exposure, rinse under running water.
5. Microstop Clean can be used in the ultrasonic bath.
DELIVERY
We deliver to all major regional centers of Ukraine, including: Kyiv, Kharkiv, Odesa, Cherkasy, Sumy and others. Delivery is carried out throughout Ukraine if there is a post office
More details: at the link